Acquista tramite un nostro rivenditore autorizzato





Scopri chi sono gli epoint ->

Celestion - FTX1225 300W 8ohm - Coaxial/Twin Cone Features - 12" coaxial loudspeaker with 300Wrms (AES standard) power handling and 97dB sensitivity - Full range frequency response: 50 - 20,000Hz - FEA (Finite Element Analysis)

Cod. prodotto: 15300163 Brand: Il prodotto non è presente nei nostri magazzini, ma potrebbe essere disponibile presso il tuo negozio di fiducia. Chiedi al nostro rivenditore a te più vicino.

Celestion - FTX1225 300W 8ohm - Coaxial/Twin Cone

Features

- 12" coaxial loudspeaker with 300Wrms (AES standard) power handling and 97dB sensitivity
- Full range frequency response: 50 - 20,000Hz
- FEA (Finite Element Analysis) optimized ferrite magnet assembly acts as common motor for both LF and HF drivers resulting in enhanced coherence
- Robust cast aluminium chassis is designed to minimize unwanted reflections, further reducing acoustic distortion
- Demodulation ring reduces flux modulation, minimizing electromagnetic distortion
- 2.5" edgewound copper clad aluminium voice coil wound on high temperature glass fibre former

General Specifications

Size: 305mm/12in
Power rating(1): 300Wrms
Nominal impedance: 8ohm
Sensitivity(2): 97dB
Frequency range: 50-4000Hz
Voice coil diameter: 64mm/2.5in
Chassis type: Cast Aluminium
Magnet type: Ferrite
Magnet weight: 2.3kg/81oz
Coil material: Edgewound copper clad aluminium
Former material: Glass fibre
Cone material: Kevlar loaded paper
Surround material: Cloth-sealed
Suspension: Single
Xmax(3): 4mm/0.16in
Gap depth: 8mm/0.31in
Voice coil winding width: 16mm/0.62in

Small Signal Parameters

D: 0.26m/10.24in
Fs: 47.8Hz
Mms: 49.44g/1.95oz
Qms: 5.714
Qes: 0.409
Mmd: 42.52g/1.5oz
Qts: 0.382
Re: 5.35ohm
Vas: 89.55lt/3.16ft3
BI: 13.94Tm
Cms: 0.224mm/N
Rms: 2.59kg/s
Le (at 1kHz): 0.78mH

General Specifications: HF

Power rating(1): 60 Wrms
Nominal impedance: 8ohm
Sensitivity(2): 104dB
Frequency range: 1000-20,000Hz
Recommended min. crossover (12dB/oct): 2000Hz
Voice coil diameter: 45mm/1.75in
Diaphragm and surround material: Polyimide

Mounting Information

Overall depth: 168mm/6.61in
Cut-out diameter: 286mm/11.26in
Mounting slot dimensions: 7.5x6.5mm/0.29x0.26in
Number of mounting slots: 8
Mounting PCD range: 298-304mm/11.70-11.97in
Unit weight: 5.9kg/13.0lb

Note

(1)Tested for two hours using a continuous, band-limited pink noisesignal as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air.
(2)Measured on axis at 1W, 1m in 2pi anechoic environment.
(3)Xmax derived from: (voice coil winding width-gap depth)/2.

Fornito senza Crossover