Prezzo consigliato:   149, 00  IVA INCLUSA
Acquista tramite un nostro rivenditore autorizzato





Scopri chi sono gli epoint ->

Celestion - FTX0820 200W 8ohm - Coaxial/Twin Cone Features - 8" coaxial loudspeaker providing 200Wrms (AES standard) power handling and 94dB sensitivity - Full range frequency response: 70 - 20,000Hz - FEA (Finite Element

Cod. prodotto: 15300162 Brand: Il prodotto è disponibile nei nostri magazzini, se il tuo negoziante di fiducia non dovesse averlo presso il suo negozio, chiedigli di ordinarlo e noi lo spediremo entro le successive 48 ore lavorative.

Celestion - FTX0820 200W 8ohm - Coaxial/Twin Cone

Features

- 8" coaxial loudspeaker providing 200Wrms (AES standard) power handling and 94dB sensitivity
- Full range frequency response: 70 - 20,000Hz
- FEA (Finite Element Analysis) optimized ferrite magnet assembly acts as common motor for both LF and HF drivers resulting in enhanced coherence
- Robust cast aluminium chassis is designed to minimize unwanted reflections, further reducing acoustic distortion
- Demodulation ring reduces flux modulation, minimizing electromagnetic distortion
- 2" edgewound copper voice coil wound on high temperature glass fibre former
- 100° nominal HF coverage

General Specifications

Power rating(1): 200Wrms
Nominal impedance: 8ohm
Sensitivity(2): 94dB
Frequency range: 70-4000Hz
Voice coil diameter: 50mm/2in
Chassis type: Cast Aluminium
Magnet type: Ferrite
Magnet weight: 1.5kg/54oz
Coil material: Edgewound copper
Former material: Glass fibre
Cone material: Kevlar loaded paper
Surround material: Cloth-sealed
Suspension: Single
Xmax(3): 2mm/0.08in
Gap depth: 8mm/0.31in
Voice coil winding width: 12mm/0.47in

Small Signal Parameters

D: 0.17m/6.69in
Fs: 63.9Hz
Mms: 21.12g/0.75oz
Qms: 4.709
Qes: 0.242
Mmd: 19.19g/0.68oz
Qts: 0.231
Re: 5.9ohm
Vas: 21.38lt/0.75ft3
BI: 14.4Tm
Cms: 0.238mm/N
Rms: 1.802kg/s
Le (at 1kHz): 0.84mH

General Specifications: HF

Power rating(1): 40Wrms
Nominal impedance: 8ohm
Sensitivity(2): 103dB
Frequency range: 1500-20,000Hz
Recommended min. crossover (12dB/oct): 2200Hz
Voice coil diameter: 34mm/1.4in
Diaphragm and surround material: Polyimide

Mounting Information

Overall depth: 114mm/4.49in
Cut-out diameter: 187mm/7.36in
Mounting slot dimensions: Ø6.5mm/0.26in
Number of mounting slots: 8
Mounting PCD range: 210mm/8.27in
Unit weight: 4.1kg/9.0lb

Note

(1)Tested for two hours using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air.
(2)Measured on axis at 1W, 1m in 2pi anechoic environment.
(3)Xmax derived from: (voice coil winding width-gap depth)/2.

Fornito senza Crossover