Prezzo consigliato:   119, 00  IVA INCLUSA
Acquista tramite un nostro rivenditore autorizzato





Scopri chi sono gli epoint ->

Celestion - FTX0617 150W 8ohm - Coaxial/Twin Cone Features - 6.5" coaxial loudspeaker providing 150Wrms (AES standard) power handling and 92dB sensitivity - Full range frequency response: 110 - 20,000Hz - FEA (Finite Element

Cod. prodotto: 15300161 Brand: Il prodotto è disponibile nei nostri magazzini, se il tuo negoziante di fiducia non dovesse averlo presso il suo negozio, chiedigli di ordinarlo e noi lo spediremo entro le successive 48 ore lavorative.

Celestion - FTX0617 150W 8ohm - Coaxial/Twin Cone

Features

- 6.5" coaxial loudspeaker providing 150Wrms (AES standard) power handling and 92dB sensitivity
- Full range frequency response: 110 - 20,000Hz
- FEA (Finite Element Analysis) optimized ferrite magnet assembly acts as common motor for both LF and HF drivers resulting in enhanced coherence
- Robust cast aluminum chassis is designed to minimize unwanted reflections, further reducing acoustic distortion
- Demodulation ring reduces flux modulation, minimizing electromagnetic distortion
- 2" edgewound copper clad aluminum voice coil wound on high temperature glass fibre former
- 100° nominal HF coverage

General Specifications

Size: 165mm/6.5in
Power rating(1): 150Wrms
Nominal impedance: 8ohm
Sensitivity(2): 92dB
Frequency range: 110-4000Hz
Voice coil diameter: 44mm/1.75in
Chassis type: Cast Aluminium
Magnet type: Ferrite
Magnet weight: 0.88kg/31oz
Coil material: Edgewound copper clad aluminium
Former material: Glass fibre
Cone material: Kevlar loaded paper
Surround material: Cloth-sealed
Suspension: Single
Xmax(3): 2mm/0.08in
Gap depth: 6mm/0.24in
Voice coil winding width: 10mm/0.4in

Small Signal Parameters

D: 0.14m/5.51in
Fs: 105.3Hz
Mms: 10.94g/0.39oz
Qms: 3.851
Qes: 1.021
Mmd: 9.86g/0.35oz
Qts: 0.807
Re: 5.57ohm
Vas: 7lt/0.25ft3
BI: 6.28Tm
Cms: 0.209mm/N
Rms: 1.88kg/s
Le (at 1kHz): 0.28mH

General Specifications: HF

Power rating(1): 40Wrms
Nominal impedance: 8ohm
Sensitivity(2): 103dB
Frequency range: 103dB
Recommended min. crossover (12dB/oct): 2200Hz
Voice coil diameter: 34mm/1.4in
Diaphragm and surround material: Polyimide

Mounting Information

Overall depth: 93mm/3.66in
Cut-out diameter: 150mm/5.9in
Mounting slot dimensions: 6.5mmx5.5mm/0.26inx0.22in
Number of mounting slots: 4
Mounting PCD range: 173.5mm/6.83in
Unit weight: 3kg/6.6lb

Note

(1)Tested for two hours using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air.
(2)Measured on axis at 1W, 1m in 2pi anechoic environment.
(3)Xmax derived from: (voice coil winding width-gap depth)/2.

Fornito senza Crossover